Hot Shoe＆Slave

When the adapter is inserted into the camera's hot shoe, the circuitry is connected to the X-contact on the side of the adapter, allowing cameras without an X-contact to be connected to a strobe with a cord (sold separately) for strobe photography.

Allows you to connect a hot shoe strobe, which does not allow cord attachment, to a camera with dedicated X-contact connection that does not have hot shoe contacts. Cord: L180mm

This is a slave unit (TR system) that supports straight flash. The strobe is attached to the shoe on the ceiling and fixed on a head or tripod to enable flashing from a distance. There is an X-contact on the back of the product, so you can connect it to another strobe with a sync cord to enable dual strobe operation.

It can be connected to both hot shoe and cord connection systems, and can wirelessly emit two lights at the same time. There is a tripod screw hole and a male shoe on the lower part of the lens for two different installation methods. PC/PC extension cord 30cm included

Capable of connecting cameras and strobes of different connection types. Functions of UN-7411 and UN-7415 are combined into one. PC/PC extension cord 30cm included

A 2-way bouncer that allows you to connect a hot-shoe strobe and adjust the beam angle freely. Includes 20cm connection cord

By connecting a sync cord (sold separately) to the X-contact on the side of the camera, you can use the strobe at a distance. You can also attach a strobe to the upper part of the hot shoe to use two strobes simultaneously.